Fujifilm GFX ETERNA 55

For Your Safety
IMPORTANT SAFETY INSTRUCTIONS
• Read InstructionsRead Instructions: All the safety and operating instructions
should be read before the appliance is operated.
• Retain InstructionsRetain Instructions: The safety and operating instructions
should be retained for future reference.
• Heed WarningsHeed Warnings: All warnings on the appliance and in the
operating instructions should be adhered to.
• Follow InstructionsFollow Instructions: All operating and use instructions
should be followed.
InstallationInstallation
Power Sources: This video product should be operated only
from the type of power source indicated on the marking la-
bel. If you are not sure of the type of power supply to your
home, consult your appliance dealer or local power com-
pany. For video products intended to operate from battery
power, or other sources, refer to the operating instructions.
Grounding or Polarization: This video product is equipped
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your electri-
cian to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
Alternate Warnings: This video product is equipped with
a three-wire grounding-type plug, a plug having a third
(grounding) pin. This plug will only fit into a grounding-type
power outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact your electrician to re-
place your obsolete outlet. Do not defeat the safety purpose
of the grounding type plug.
Overloading: Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
Ventilation: Slots and openings in the cabinet are provided
for ventilation, to ensure reliable operation of the video prod-
uct and to protect it from overheating, and these openings
must not be blocked or covered. The openings should never
be blocked by placing the video product on a bed, sofa, rug,
or other similar surface.
This video product should not be placed in a built-in instal-
lation such as a bookcase or rack unless proper ventilation is
provided or the manufacturer’s instructions have been ad-
hered to. This video product should never be placed near or
over a radiator or heat register.
Attachments: Do not use attachments not recommended by
the video product manufacturer as they may cause hazards.
Water and Moisture: Do not use this video product near wa-
ter—for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool,
and the like.
Power-Cord Protection: Power-supply cords should be routed
so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular atten-
tion to cords at plugs, convenience receptacles, and the point
where they exit from the appliance.
Accessories: Do not place this video product on an unstable
cart, stand, tripod, bracket, or table. The video product may
fall, causing serious injury to a child or adult, and serious
damage to the appliance. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or sold
with the video product. Any mounting of the appliance
should follow the manufacturer’s instructions, and should
use a mounting accessory recommended by the manufac-
turer.
An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance and
cart combination to overturn.
AntennasAntennas
Outdoor Antenna Grounding: If an outside antenna or cable
system is connected to the video product, be sure the an-
tenna or cable system is grounded so as to provide some
protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code, ANSI/NFPA No.
70, provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding con-
ductors, location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding
electrode.
EXAMPLE OF ANTENNA GROUNDING AS
PER NATIONAL ELECTRICAL CODE
Ground Clamp
tElectric Service Equipmente Equipment
AAntenna Lead
in Wire
AAAntennaAn
Discharge UnitD
(NEC SECTIONN
810-20)8
Ground Clamps
Power Service Grounding Electrode
System (NEC ART 250. PART H)
Grounding
Conductors (NEC
SECTION 810-21)
208
Technical Notes
10
Power Lines: An outside antenna system should not be locat-
ed in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
UseUse
Cleaning: Unplug this video product from the wall outlet be-
fore cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
Object and Liquid Entry: Never push objects of any kind into
this video product through openings as they may touch dan-
gerous voltage points or short out parts that could result in
a fire or electric shock. Never spill liquid of any kind on the
video product.
Lightning: For added protection for this video product re-
ceiver during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the video product due to lightning and
power-line surges.
ServiceService
Servicing: Do not attempt to service this video product
yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
Damage Requiring Service: Unplug this video product from
the wall outlet and refer servicing to qualified service person-
nel under the following conditions:
• When the power-supply cord or plug is damaged
• If liquid has been spilled, or objects have fallen into the
video product.
• If the video product has been exposed to rain or water.
• If the video product has been dropped or the cabinet has
been damaged.
If the video product does not operate normally follow the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper adjust-
ment of other controls may result in damage and will often
require extensive work by a qualified technician to restore
the video product to its normal operation.
When the video product exhibits a distinct change in perfor-
mance — this indicates a need for service.
Replacement Parts: When replacement parts are required, be
sure the service technician has used replacement parts spec-
ified by the manufacturer or have the same characteristics as
the original part. Unauthorized substitutions may result in
fire, electric shock or other hazards.
Safety Check: Upon completion of any service or repairs to
this video product, ask the service technician to perform
safety checks to determine that the video product is in prop-
er operating condition.
Be sure to read these notes before use
Safety Notes
• Make sure that you use your camera correctly. Read these
safety notes and your Owner’s Manual carefully before use.
• After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indicate
the severity of the injury or damage that can result if the in-
formation indicated by the icon is ignored and the product is
used incorrectly as a result.
WARNINGWARNING This icon indicates that death or serious in-
jury can result if the information is ignored.
CAUTIONCAUTION
This icon indicates that personal injury or
material damage can result if the informa-
tion is ignored.
The icons shown below are used to indicate the nature of the
instructions which are to be observed.
Triangular icons tell you that this information re-
quires attention (“Important”).
Circular icons with a diagonal bar tell you that the
action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate an
action that must be performed (“Required”).
The symbols on the product (including the accessories) rep-
resent the following:
AC
DC
Class II equipment (The construction of the product
is double-insulated.)
WARNINGWARNING
Unplug
from power
socket
If a problem arises, turn the camera off, remove theIf a problem arises, turn the camera off, remove the
battery, disconnect the USB cable, and unplug the ACbattery, disconnect the USB cable, and unplug the AC
power adapter.power adapter. Continued use of the camera when
it is emitting smoke, is emitting any unusual odor,
or is in any other abnormal state can cause a fire or
electric shock. Contact your Fujifilm dealer.
Do not allow water or foreign objects to enter the cam-Do not allow water or foreign objects to enter the cam-
era or connecting cables.era or connecting cables. Do not use the camera or
connecting cables following ingress of fresh or salt
water, milk, beverages, detergents, or other liquids.
Should liquid fi nd its way into the camera or connectingShould liquid find its way into the camera or connecting
cables, turn the camera off, remove the battery, discon-cables, turn the camera off, remove the battery, discon-
nect the USB cable, and disconnect and unplug the ACnect the USB cable, and disconnect and unplug the AC
adapter.adapter. Continued use of the camera can cause a
fire or electric shock. Contact your Fujifilm dealer.
209
Technical Notes
10
For Your Safety
WARNINGWARNING
Do not use in
the bathroom
or shower
Do not use the camera in the bathroom or shower.Do not use the camera in the bathroom or shower. This
can cause a fire or electric shock.
Do not
disassemble
Never attempt to change or take apart the camera (nev-Never attempt to change or take apart the camera (nev-
er open the case).er open the case). Failure to observe this precaution
can cause fire or electric shock.
Do not touch
internal
parts
Should the case break open as the result of a fall orShould the case break open as the result of a fall or
other accident, do not touch the exposed parts.other accident, do not touch the exposed parts. Failure
to observe this precaution could result in electric
shock or in injury from touching the damaged
parts. Remove the battery immediately, taking care
to avoid injury or electric shock, and contact your
Fujifilm dealer.
Do not change, heat or unduly twist or pull the connec-Do not change, heat or unduly twist or pull the connec-
tion cord and do not place heavy objects on the connec-tion cord and do not place heavy objects on the connec-
tion cord.tion cord. These actions could damage the cord and
cause a fire or electric shock. If the cord is damaged,
contact your Fujifilm dealer. Do not use cables with
bent connectors.
Do not place the camera on an unstable surface.Do not place the camera on an unstable surface. This
can cause the camera to fall or tip over and cause
injury.
Never attempt to record movies while in motion.Never attempt to record movies while in motion. Do
not use shooting, playback, or any other opera-
tions of the camera while operating a car or other
vehicle. This can result in you falling down or being
involved in a traffic accident. If you record movies
while walking, pay attention to your surroundings.
Do not touch any metal parts of the camera during aDo not touch any metal parts of the camera during a
thunderstorm.thunderstorm. This can cause an electric shock due
to induced current from the lightning discharge.
Do not use the battery except as specifi ed.Do not use the battery except as specified. Load the
battery as shown by the indicator.
Do not disassemble, modify, or heat batteries. Do notDo not disassemble, modify, or heat batteries. Do not
drop, strike, or throw batteries or otherwise subjectdrop, strike, or throw batteries or otherwise subject
them to strong impacts. Do not use batteries thatthem to strong impacts. Do not use batteries that
show signs of leaking, deformation, discoloration, orshow signs of leaking, deformation, discoloration, or
other abnormalities. Use only designated chargers toother abnormalities. Use only designated chargers to
recharge rechargeable batteries and do not attempt torecharge rechargeable batteries and do not attempt to
recharge non-rechargeable lithium or alkaline batter-recharge non-rechargeable lithium or alkaline batter-
ies. Do not short batteries or store them with metallicies. Do not short batteries or store them with metallic
objects.objects. Failure to observe these precautions could
result in the batteries overheating, igniting, ruptur-
ing, or leaking, causing fire, burns, or other injury.
WARNINGWARNING
Use only batteries or AC power adapters specifi ed forUse only batteries or AC power adapters specified for
use with this camera. Do not use voltages other than theuse with this camera. Do not use voltages other than the
power supply voltage shown.power supply voltage shown. The use of other power
sources can cause a fire.
If the battery leaks and fl uid gets in contact with yourIf the battery leaks and fluid gets in contact with your
eyes, skin or clothing, fl ush the affected area with cleaneyes, skin or clothing, flush the affected area with clean
water and seek medical attention or call an emergencywater and seek medical attention or call an emergency
number right away.number right away.
Using a fl ash too close to a person’s eyes may causeUsing a flash too close to a person’s eyes may cause
visual impairment.visual impairment. Take particular care when pho-
tographing infants and young children.
Do not remain in prolonged contact with hot surfaces.Do not remain in prolonged contact with hot surfaces.
Do not leave one part of the body in contact with theDo not leave one part of the body in contact with the
product for prolonged periods while the product is on.product for prolonged periods while the product is on.
Failure to observe this precaution could result in
low-temperature burns, particularly during pro-
longed use, at high ambient temperatures, or with
users who suffer from poor circulation or reduced
sensation, in which case use of a tripod or similar
precautions are recommended.
Do not use in the presence of fl ammable objects, explo-Do not use in the presence of flammable objects, explo-
sive gases, or dust.sive gases, or dust.
When carrying the battery, install it in a camera or keepWhen carrying the battery, install it in a camera or keep
it in the hard case. When storing the battery, keep it init in the hard case. When storing the battery, keep it in
the hard case. When discarding, cover the battery termi-the hard case. When discarding, cover the battery termi-
nals with insulation tape.nals with insulation tape. Contact with other metal-
lic objects or batteries could cause the battery to
ignite or burst.
Keep memory cards, shoe covers, and other small partsKeep memory cards, shoe covers, and other small parts
out of the reach of small children.out of the reach of small children. Children may
swallow small parts; keep out of reach of children.
Should a child swallow a small part, seek medical
attention or call emergency.
Keep out of reach of small children.Keep out of reach of small children. Among the ele-
ments that could cause injury are the strap, which
could become entangled about a child’s neck,
causing strangulation.
Follow the directions of airline and hospital personnel.Follow the directions of airline and hospital personnel.
This product generates radio-frequency emissions
that could interfere with navigational or medical
equipment.
210
Technical Notes
10
CAUTIONCAUTION
Do not use this camera in locations affected by oilDo not use this camera in locations affected by oil
fumes, steam, humidity or dust.fumes, steam, humidity or dust. This can cause a fire
or electric shock.
Do not leave this camera in places subject to extremelyDo not leave this camera in places subject to extremely
high temperatures.high temperatures. Do not leave the camera in loca-
tions such as a sealed vehicle or in direct sunlight.
This can cause a fire.
Do not place heavy objects on the camera.Do not place heavy objects on the camera. This can
cause the heavy object to tip over or fall and cause
injury.
Do not move the camera while the AC power adapter isDo not move the camera while the AC power adapter is
still connected.still connected. Do not pull on the connection cord to
disconnect the AC power adapter. This can damage
the power cord or cables and cause a fire or electric
shock.
Do not cover or wrap the camera or the AC power adapt-Do not cover or wrap the camera or the AC power adapt-
er in a cloth or blanket.er in a cloth or blanket. This can cause heat to build
up and distort the casing or cause a fire.
Do not use the plug if it is damaged or if it does not fi tDo not use the plug if it is damaged or if it does not fit
securely into the outlet.securely into the outlet. Failure to observe this pre-
caution could result in fire or electric shock.
When you are cleaning the camera or you do not plan toWhen you are cleaning the camera or you do not plan to
use the camera for an extended period, remove the bat-use the camera for an extended period, remove the bat-
tery and disconnect and unplug the AC power adapter.tery and disconnect and unplug the AC power adapter.
Failure to do so can cause a fire or electric shock.
When charging ends, unplug the charger from theWhen charging ends, unplug the charger from the
power socket.power socket. Leaving the charger plugged into the
power socket can cause a fire.
When a memory card is removed, the card could comeWhen a memory card is removed, the card could come
out of the slot too quickly. Use your fi nger to hold it andout of the slot too quickly. Use your finger to hold it and
gently release the card.gently release the card. Injury could result to those
struck by the ejected card.
Do not handle the memory card immediately afterDo not handle the memory card immediately after
shooting.shooting. The memory card may be hot, resulting
in burns. Wait for the card to cool before removing
it from the camera.
Request regular internal testing and cleaning for yourRequest regular internal testing and cleaning for your
camera.camera. Build-up of dust in your camera can cause
a fire or electric shock. Contact your Fujifilm dealer
to request internal cleaning every two years. Please
note that this service is not free of charge.
Dispose of the product in accord with location regula-Dispose of the product in accord with location regula-
tions.tions.
Do not cover the air intakes or exhaust vent with tapeDo not cover the air intakes or exhaust vent with tape
or other materials. Do not place any obstructions nearor other materials. Do not place any obstructions near
the air intakes or exhaust vent.the air intakes or exhaust vent. Failure to observe this
precaution may reduce cooling performance or
cause a malfunction.
CAUTIONCAUTION
Danger of explosion if battery is incorrectly replaced.Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.Replace only with the same or equivalent type.
Batteries (battery pack or batteries installed) shall notBatteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, fi re orbe exposed to excessive heat such as sunshine, fire or
the like.the like.
211
Technical Notes
10
For Your Safety
The Battery and Power Supply
Note: Check the type of battery used in your camera and read
the appropriate sections.
WARNING: Battery shall not be exposed to excessive heat
such as sunshine, fire or the like.
The following describes the proper use of batteries and how
to prolong their life. Incorrect use can shorten battery life or
cause leakage, overheating, fire, or explosion.
Li-ion BatteriesLi-ion Batteries
Read this section if your camera uses a rechargeable Li-ion
battery.
The battery is not charged at shipment. Charge the battery
before use. Keep the battery in its case when not in use.
LLNotes on the BatteryNotes on the Battery
The battery gradually loses its charge when not in use.
Charge the battery one or two days before use.
Battery life can be extended by turning the camera off when
not in use.
Battery capacity decreases at low temperatures; a depleted
battery may not function when cold. Keep a fully charged
spare battery in a warm place and exchange as necessary,
or keep the battery in your pocket or other warm place and
insert it in the camera only when shooting. Do not place the
battery in direct contact with hand warmers or other heating
devices.
LL Charging the BatteryCharging the Battery
The battery can be charged using the camera and supplied
AC adapter or an optional BC-W235 dual battery charger.
Charging times will increase at ambient temperatures below
+10 °C (+50 °F) or above +35 °C (+95 °F). Do not attempt to
charge the battery at temperatures above +40 °C (+104 °F); at
temperatures below +5 °C (+41 °F), the battery will not charge.
Do not attempt to recharge a fully charged battery. The battery
does not however need to be fully discharged before charging.
The battery may be warm to the touch immediately after
charging or use. This is normal.
LLBattery LifeBattery Life
A noticeable decrease in the length of time the battery will
hold a charge indicates that it has reached the end of its ser-
vice life and should be replaced.
If the battery is left for long periods without charging, you
may find that its quality degrades or that it no longer holds a
charge. Charge the battery regularly.
LLStorageStorage
If the camera will not be used for an extended period, store
it at room temperature with the battery charged to approxi-
mately one half to ⁄ capacity.
If the camera will not be used for an extended period, re-
move the battery and store it in a dry place with an ambient
temperature of from +15 °C to +25 °C (+59 °F to +77 °F). Do
not store in locations exposed to extremes of temperature.
LLCautions: Handling the BatteryCautions: Handling the Battery
• Do not transport or store with metal objects such as neck-
laces or hairpins.
• Do not expose to flame or heat.
• Do not disassemble or modify.
• Do not expose to low atmospheric pressures.
• Use with designated chargers only.
• Dispose of used batteries promptly.
• Do not drop or subject to strong physical shocks.
• Do not expose to water.
• Keep the terminals clean.
• The battery and camera body may become warm to the
touch after extended use. This is normal.
LCaution: DisposalDisposal
Dispose of used batteries in accord with local regulations.
Attention should be drawn to the environmental aspects of
battery disposal. Use the apparatus under moderate climate.
Do not mechanically crush or split batteries.
AC Power AdaptersAC Power Adapters
• Be sure the cable is securely connected to the camera.
• Turn the camera off before disconnecting the adapter. Dis-
connect the adapter by the plug, not the cable.
• Do not disassemble.
• Do not expose to high heat and humidity.
• Do not subject to strong physical shocks.
• The adapter may hum or become hot to the touch during
use. This is normal.
• If the adapter causes radio interference, reorient or relocate
the receiving antenna.
212
Technical Notes
10
Using the Camera
Do not aim the camera at extremely bright light sources, in-
cluding artificial light sources or natural light sources such as
the sun in a cloudless sky. Failure to observe this precaution
could damage the camera image sensor or ND filter.
Take Test ShotsTake Test Shots
Before taking photographs on important occasions (such as
at weddings or before taking the camera on a trip), take a
test shot and view the results to ensure that the camera is
functioning normally. FUJIFILM Corporation cannot accept
liability for damages or lost profits incurred as a result of
product malfunction.
Notes on CopyrightNotes on Copyright
Unless intended solely for personal use, images recorded us-
ing your camera system cannot be used in ways that infringe
copyright laws without the consent of the owner. Note
that some restrictions apply to the photographing of stage
performances, entertainments, and exhibits, even when in-
tended purely for personal use. Users are also asked to note
that the transfer of memory cards containing images or data
protected under copyright laws is only permissible within
the restrictions imposed by those copyright laws.
HandlingHandling
To ensure that images are recorded correctly, do not subject
the camera to impact or physical shocks while images are
being recorded.
Liquid CrystalLiquid Crystal
In the event that the display is damaged, care should be tak-
en to avoid contact with liquid crystal. Take the urgent action
indicated should any of the following situations arise:
• If liquid crystal comes in contact with your skin, clean the
area with a cloth and then wash thoroughly with soap and
running water.
• If liquid crystal enters your eyes, flush the affected eye with
clean water for at least 15 minutes and then seek medical
assistance.
• If liquid crystal is swallowed, rinse your mouth thoroughly
with water. Drink large quantities of water and induce vom-
iting, then seek medical assistance.
Although the display is manufactured using extremely
high-precision technology, it may contain pixels that are
always lit or that do not light. This is not a malfunction, and
images recorded with the product are unaffected.
Trademark InformationTrademark Information
Digital Split Image is a trademark or registered trademark of
FUJIFILM Corporation. Digital Micro Prism is a trademark or
registered trademark of FUJIFILM Corporation. The typefaces
included herein are solely developed by DynaComware
Taiwan Inc. Apple, iPhone, iPad, Mac, Mac OS X, OS X, macOS,
Lightning and Apple ProRes are registered trademarks of
Apple Inc. in the U.S.A. and other countries. Windows is a
registered trademark of Microsoft Corporation in the U.S.A.
and other countries. Android is a trademark or registered
trademark of Google LLC. Adobe, the Adobe logo, Camera
to Cloud, Frame.io, Lightroom and Photoshop are either
registered trademarks or trademarks of Adobe in the United
States and/or other countries. Wi-Fi®, the Wi-Fi CERTIFIED
logo, and Wi-Fi Protected Setup® are registered trademarks of
the Wi-Fi Alliance®. The Bluetooth® word mark and logos are
registered trademarks owned by the Bluetooth SIG, Inc., and
any use of such marks by Fujifilm is under license. The SDHC
and SDXC logos are trademarks of SD-3C, LLC. CFexpress is
a trademark of the CFA (CompactFlash Association). The
HDMI logo is a trademark or registered trademark of HDMI
Licensing LLC. QR Code is a registered trademark of DENSO
WAVE INCORPORATED. USB Type-C® and USB-C® are regis-
tered trademarks of USB Implementers Forum. AirGlu™ is a
trademark or registered trademark of Atomos. All other trade
names mentioned in this manual are the trademarks or regis-
tered trademarks of their respective owners.
Electrical InterferenceElectrical Interference
This camera may interfere with hospital or aviation equip-
ment. Consult with hospital or airline staff before using the
camera in a hospital or on an aircraft.
Color Television SystemsColor Television Systems
NTSC (National Television System Committee) is a color tele-
vision telecasting specification adopted mainly in the U.S.A.,
Canada, and Japan. PAL (Phase Alternation by Line) is a color
television system adopted mainly in European countries and
China.
213
Technical Notes
10
For Your Safety
IMPORTANT NOTICE: Read Before Using the Software
Direct or indirect export, in whole or in part, of licensed software without the permission of the applicable governing bodies
is prohibited.
Lenses and Other Accessories
• Read the manuals provided with the camera and lens when attaching the lens, and attach the lens correctly. We cannot
guarantee accidents or malfunctions caused by incorrect attachment.
• For accessory mounting screw holes, use products with a screw length less than or equal to the hole depth indicated in
the external dimensions (P 241).
• Fujifilm will not be held liable for performance issues or damage caused by the use of third-party accessories.
NOTICES
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
Please read the “Safety Notes” and make sure you understand them before using the camera.
Perchlorate Material—special handling may apply. See:
http://www.dtsc.ca.gov/hazardouswaste/perchlorate
214
Technical Notes
10
For Customers in the U. S. A.For Customers in the U. S. A.
Tested To Comply With FCC Standards
Contains IC : 10293A-BM25EXT
Contains FCC ID : COF-BM25-EXT
FCC Statement: This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, includ-
ing interference that may cause undesired operation.
CAUTION: This equipment has been tested and found to com-
ply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residen-
tial area is likely to cause harmful interference in which case
the user will be required to correct the interference at his
own expense.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and re-
ceiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
FCC Caution: Any changes or modifications not expressly ap-
proved by the party responsible for compliance could void
the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in con-
junction with any other antenna or transmitter.
Radiation Exposure Statement: This device meets the gov-
ernment’s requirements for exposure to radio waves. This
device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy
set by the Federal Communications Commission of the U.S.
Government.
The exposure standard for wireless device employs a unit of
measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are
conducted using standard operating positions accepted by
the FCC with the device transmitting at its highest certified
power level in all tested frequency bands.
Notes on the Grant: To comply with Part 15 of the FCC Rules,
this product must be used with a Fujifi lm-specifi ed fer-
rite-core A/V cable, USB cable, and DC supply cord.
A lithium ion battery that is recyclable powers
the product you have purchased. Please call
1-800-8-BATTERY for information on how to
recycle this battery.
California Code of Regulations, Title 20, Di-
vision 2, Chapter 4, Article 4, Appliance Ef-
ficiency Regulations, Sections 1601 through
1609